HUAWEI 5G CPE Pro2 Router H122-373 - no simlock - white

Product Information

HUAWEI 5G CPE Pro 2 puts more Wi-Fi devices on the same network, totaling up to 128 devices. Its Balong dual-core CPU ensures smooth and stable performance when connecting to multiple devices. And it also reduces the wait time of your devices with MU-MIMO, by sending signals to 16 devices simultaneously. Perfect for crowded offices or large houses where many people need to use phones, tablets and laptops at the same time. Anyway, since all these works have completed. I have gained a new, but not very speedy VF 5G signal to my mobile. Though my 3 signal to my CPE Pro seems to have gone unpredictably unstable. It suddenly can lose up speed, or be seriously laggy. Though then the next minute be great again!?

HUAWEI 5G CPE Pro 2 adopts a 30 dB cooling fan to get rid of any disturbing noise, even during heavy use. The fan will also adjust its speed depending on the detected temperatures, which allows for efficient heat dissipation and consistent performance over a long period. In addition, many users will miss connections for an external antenna. It is true that the use of an external antenna in 5G operation only makes limited sense, as a large number of frequency ranges are often bundled and more than 2 × 2 MIMO is used. Unfortunately, there is also no USB port, for example to integrate storage media into the network. LEDs and fans From the frequencies, 3630Mhz is the middle of Three's full 100Mhz n78 spectrum (3580-3680Mhz) and 3599.9Mhz (round it up to 3600Mhz) is the middle of what Three use for their reduced spectrum 40Mhz 5G cells (3580-3620Mhz). Adopting HUAWEI patented magnetic-electric dipole Wi-Fi antenna, HUAWEI 5G CPE Pro 2 allows the signal to travel in all directions alike, covering 30% more spaces8 with evenly distributed signals. Combining Dynamic Narrow Bandwidth Technology (down to 2 MHz) and Chipset Synergy, the coverage of HUAWEI 5G CPE Pro 2 is further improved, allowing HUAWEI Wi-Fi 6-enabled phones to have good reception even when placed in a region far from the router. The speeds were very good both in 5G operation and in LTE operation. In the downlink, around 1 Gbit/s in the downlink and around 160 Mbit/s in the uplink were possible via 5G using band n78. When using band n1, up to 450 Mbit/s was achieved in the downlink. The latency times were pleasantly short, sometimes well below 15 milliseconds. In the LTE network, up to 450 Mbit/s in the downlink and up to 95 Mbit/s in the uplink were achieved.I bought the CPE Pro 2 to see if this improved my connection and to also test my VF sim. Firstly the VF sim seems to be very laggy in comparison to 3 signal (10's of ms verses 100's of ms!) which isn't what I'm looking for obviously. Though am aware that VF have just got planning for a new 5G tower locally, so must still be rolling out? The speed of your Wi-Fi can see a speed increase of 150%, boosted to 2976 Mbps on dual bands using Wi-Fi 6. It is also possible to for Huawei Fi-Fi 5 enabled phone to take full advantage of the 1060 Mhz wide frequency bandwidth. Reasons to buy the Huawei 5G CPE Pro 2 – Wi-Fi Router

The Huawei 5G CPE Pro 2 can supply up to 128 devices simultaneously with a WLAN connection. The WLAN network on 5 GHz is preferred by the Huawei 5G CPE Pro 2 by default, i.e. even if you explicitly connect to the 2.4 GHz network, the connection is established on 5 GHz, provided the end device supports this frequency range. The user benefits from significantly higher speeds, but can of course also deactivate the function in the web interface if necessary. Software and operation Anyway my replacement is due tomorrow (18th) but this time around knowing they B07 firmware is screwed I’ll be plugging the router in without the sim so it can’t update while i see if there is an option to ignore or defer firmware updates etc for the time being. I'm trying to work out what my next steps would be and it would help to know if anyone else is using this router on EE 5G and has similar issues. From the EE forums, it looks like it could be a flaw with the router design but without trying another one, I don't know for sure. With Wi-Fi 6, the speed of HUAWEI 5G CPE Pro 2 increases by 150%, boosted to 2976 Mbps on dual bands.6 Its Gigahome Wi-Fi 6 chipset, supporting Chipset Synergy, also allows HUAWEI Wi-Fi 5-enabled phones7 to take full advantage of 160 MHz wide frequency bandwidth. Network Slicing - customize your network with desirable characteristics like low latency for ultra-smooth gaming, high bandwidth for watching 8K movies, and moreI have to take my hat off to some of those in this thread as they are way more patient and understanding than me. Data from HUAWEI test lab. Simultaneously connect up to 16 devices with 5 GHz Wi-Fi. Simultaneously connect up to 4 devices with 2.4 GHz Wi-Fi.

According to Three’s customers, who have been busy posting in a related topic on our discussion forum, the issue looks to have started during the early hours of Sunday (8th May) morning – after the operator began to push out a new firmware update for the 5G Hub (release: BD_UKH3GMC801AV1.0.0B07). Experiences may vary, as not everybody will always receive such updates at the same time.Direct line of sight to the 5G mast a few 100m away so it’s not signal issues I don’t think (and has always been very fast and stable up until now, couple of months since I got the thing).” Data from HUAWEI test lab, by comparing HUAWEI 5G CPE Pro 2 and HUAWEI 5G CPE Pro. The theoretical value of 5 GHz Wi-Fi is 2402 Mbps, while the theoretical value of 2.4 GHz Wi-Fi is 574 Mbps. HUAWEI Wi-Fi 5-enabled phones includes Mate30 series, P30 series, Mate20 series, etc. All of them support 160 MHz bandwidth. After a number of months smooth service, my CPE Pro and 5G service with Three has started becoming a little unpredictable. I had a text a number of weeks ago from 3, to advise there was some work happening on my local mast, and there may be some service interruptions. Interestingly, also on my VF mobile contract, I got the same message. So assume they share the same mast!? To note I never had VF 5G signal at home at this point, only 4G. After works completed, VF continued to send the odd message over the next few weeks letting me know of further works with apologies. 3 sent no further updates. We did get the odd time of things going slow and complete outage, but it wasn't that bad. I also noted there were some significant ground works happening locally to me with Instalcom, may have no connection. But seems like coincidence.