Oypla Heavy Duty Plumbers Pipe Bender Tool With 15mm and 22mm Formes

Product Information

And let’s face it, two separate guides just mean you have two more things to lose, and two more things you’ve got to find in your van every morning. Place the Lever Arm over the positioned pipe and place the Lever Hook onto the Pivot Pins, ensure the Nylon Guide is seated. The 15mm/22mm guides on the Hilmor copper pipe benders are integrated. No swapping out when you change the size pipe you’re bending, and nothing to lose. The Monument 2600K 15mm and 22mm is a best selling pipe bender. These are available in Monument brand widely available across the UK from plumbers merchants and e-tailers MON2600 2600K, Instinct® brand INST2600 from PHG independent plumbers merchants and also from UKPS plumbers merchants including Plumbase under Entity® brand ENT2600. When initially launched on the UK market Monument ensured that the hook stop was redesigned so as to not mark the pipe. A. Over the years been a few reasons, main reason I find or is poor quality copper! Other reason dirt on the guides generally a good clean and oil or dw40 sorts it out, had once with bender that had been dropped and it was slightly twisted (Answered by B H heating solutions on 26 Jan 2021)

It is well documented that soldered fittings and compression fittings interrupt the flow of water around a heating system. Bending of copper pipe ensures unrestricted flow of water and can also create attractive, crafted finishes on installations. better sight lines– as the bend is in the same plane as the Arms of the bender it is easier to line up by eye throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM A. Cheap thin copper but even expensive copper ripples. But makes a big difference with running wire wool over the guides first. Keep them clean. Found the wee monument benders don’t ripple the pipe as much. Great wee benders (Answered by Roy Millar Plumbing and Heating on 26 Jan 2021)Usually, a lightweight product is a good thing. Take a cordless impact driver for instance. The lighter, the better. Before you remove the pipe from the Former, view your bend angle; remove the pipe if it is correct, or if necessary, reapply the Lever Arm and increase the bend angle. Frequently Asked Questions FAQs XV is much smaller than a combi; arm length is 40cm compared to a combi arm length of 65cm. Note the 15mm XVL & 22mm XXII arm lengths are about 60cm The Monument Masters 1215K-XV, 1315-XVE, 1315Longarm-XVL , 1222G-XXII and 1322Extended-XXIIE create similar bend radiuses to a Monument 2600K combi bender; in fact the 1222G has a slightly tighter radius that the 2600K combi bender, as this radius is tighter it creates a slightly different profile on the outside of the bend when compared to a combi.

better sight lines – as the bend is in the same plane as the Arms of the bender it is easier to line up by eye But when it comes to buying new ones, I guess it’s Silverline that stands out as the biggest contender to Hilmor. We have included bending angles of 30 45 60 and 90 degrees on the XV and XVL 15mm versions and an additional 75 degree angle on the 22mm version; these are easily visible on the Former of each bender. Differences compared to a combi bender We have included bending angles of 30 45 60 and 90 degrees on the XV and XVL 15mm versions and an additional 75 degree angle on the 22mm version; these are easily visible on the Former of each bender. Mark the pipe where you want start of the bend. Position the pipe in the Former under the Retaining Hook. Position the start of bend vertically in line with the Pivot Pin.Buy the Monument Bender Single Sized – 1215K-XV 1315- XVE (1315Longarm-XVL) 1222G-XXII 1322Extended-XXIIE We posed this question through the Tooltalk App (see all the answers in the app available for iOS or Android AOS).

If you’re working with microbore, unfortunately, there isn’t a set from Hilmore currently available in the UK.

The Best Copper Pipe Benders

They weigh under 500g, and that’s pretty-lightweight, but they certainly provide more than enough power to get the job done.