Genius GFX-75X4 1800 Watts-Max Car Amplifier 4-Channels Professional Class-AB 2-Ohm Stable Stereo

Product Information

Applications include void spanning, reinforced soil walls and slopes, veneer stability, basal embankment reinforcement and load transfer platforms. Features & Benefits: Tensar SS20 Geogrid Reinforcement Roll 4m x 75m ZORBAX Rapid Resolution High Throughput (RRHT) columns use totally porous 1.8 μm particles to provide maximum resolution in ultra-fast and high-resolution analyses with a pressure limit of 600 bar All of the amplifiers have a cool new cosmetic treatment and have the controls hidden behind a magnetically-latched cover panel. For the purposes of this review, they sent us a pre-production prototype of the five-channel version, called the VIV (Six Five, get it?) 900.5. Agilent UHPLC Guards extend the lifetime of analytical columns - without diminishing performance - and use easy-to-install hardware that fits directly on the end of the column

The amp proved to have plenty of power on tap, even for enthusiastic listening levels. During several hours of focused listening, the Memphis amplifier sounds very natural and uncolored, regardless of the musical selection, handling dynamics and my reference woofer and full-range speakers with ease, while barely getting warm to the touch. This amplifier is exceptionally efficient, and not just at high power levels. I noticed the current draw was quite low, even when playing music at fairly loud levels. When it was all said and done, the VIV900.5 proved to be a very natural-sounding and powerful amplifier. From a sonic perspective, the amp is very musical and virtually transparent. Stereo imaging is excellent, and there is no audible noise of any kind. From one end of the audible spectrum to the other, it simply made things louder, which is exactly what a good amp should do. With my wide ranging (some say ridiculous) musical tastes, I could go from 50 Cent, to Bach, to ZZ Top without any issues or adjustments. Low-bass is produced with authority and exhibits very good definition, while the amp still maintains smooth and detailed high frequencies, with no harshness or edginess. Female vocals are smooth and harmonies well-defined, with no muddiness or smearing of the soundstage evident. Chip SMD resistors are commonly used for pull-up/pull-down operations to ensure a signal is at valid logic level when external devices are removed, voltage divisions, current limiting, and filtering signals at certain frequencies in high-pass/low-pass/band-pass filters. You can use 0Ω resistors as jumpers to disable a sub-section of a circuit. There are three kinds of Chip SMD Resistors:ZORBAX StableBond columns offer the highest stability for low pH applications down to pH 1 while ZORBAX SB-Aq deliver robust, reproducible separations with highly aqueous mobile phases, including 100% water The new look from Memphis also comes with a few unusual features, such as the ability to select from one of seven possible illumination colors for the power-on indication. The control for the LED color is found along with all of the rest of the controls, under the hinged front cover of the amplifier, just above the connections. In addition to the variable LED color, the amp is equipped with 24-dB-per-octave crossovers, which provide bandpass configurations in addition to the typical high- and low-pass filters. Easy to handle and install, this Tensar SS20 Geogrid Reinforcement Roll is ideal for improving soil shear strength and soil stiffness through reinforcement, a geosynthetic function. With enhanced design life and decreased full-life costs, it works as an application for long-term loading that depends on long-term tensile strength with factors accommodating tensile creep. The VIV900.5 is rated at 50x4+300x1 into four ohms, or 75x4+500x1 at two ohms. Should the need arise, the sub channel can also drive a one-ohm load. Also, in the interest of maximizing system design flexibility and installation friendliness, the VIV900.5 has three different ways to turn it on, with sensing for DC offset as found on most head units, signal sensing with musical input, and the conventional 12-volt trigger. To make signal routing simpler for installers, there is also a switch that allows you to drive the amplifier with just a single pair of inputs, or four inputs to allow fading with constant bass output.

When it comes to tuning the system, to complement the accurate DSP-controlled crossover filters, there is also a variable bass boost controller that can provide up to 18-dB of bass boost at 45 Hz. This filter is also designed to have a high Q factor, which means its bandwidth is narrow so as to not have a detrimental effect on adjacent frequencies. This makes it more effective as a tuning tool, and results in a deeper, tighter bottom end. Traditional, fully porous particles available in 1.8, 3.5, and 5 µm sizes. With selected products also available in 7 μm particles for preparative HPLC (see Prep LC columns section)ZORBAX Bonus RP columns offer unique selectivity due to an embedded amide linkage in the C14-alkyl chain making them ideal for 100% aqueous mobile phases and for compounds that are not retained on standard reverse phase columns I am a fan of this amplifier. It’s well-made, sounds good, has a lot of adjustability, and can easily be interfaced into almost any type of installation. If you’re in the market for a high-performance multi-channel amplifier that can drive your whole system with only one chassis, the Memphis VIV900.5 should be high on your list of amps to audition.

I connected the amp in my sound room’s reference system, using a two-ohm 12 in a sealed enclosure as my woofer system, and then two pairs of four-ohm component speakers were connected for the full-range sound. After setting the subwoofer crossover to 80 Hz and leaving the full-range channels in all-pass mode, I was ready for some listening. As soon as I began to audition the VIV900.5, I knew I was in for some fun. The new series is known as the Six Five Series, and is Memphis’ first real foray into the DSP world. There are seven different models in the series with one-, two-, four- and five-channel variations. Per- and polyfluoroalkyl substances (PFAS) are a large group of anthropogenic chemicals that have been applied in industrial, commercial, and domestic products since the 1950s. Because of their toxicity, persistence, and bioaccumulation potential, PFAS have become global environmental pollutants. Besides the environment, the food chain represents another source of exposure, and the risk related to the presence of PFAS in foods has become of increased interest. Whole milk, infant formula, and ingredients used in infant formula production represent important foodstuffs that require sensitive methods with reporting limits at low parts per billion levels or lower for multiple PFAS. This article summarizes optimization experiments and validation of a complete workflow, including sample preparation and a liquid chromatography–tandem mass spectrometry (LC–MS/MS) method for determination of sixteen priority PFAS analytes listed by the U.S. Food and Drug Administration (FDA). The heatsink is sized appropriately for this powerful an amplifier, and because of that and the high efficiency Class-D topology, the amplifier has excellent thermal performance, which is a sore spot for a lot of multi-channel car amps. The power and speaker connections will take generously sized cables (four- and 10-gauge, respectively) and the terminals are well-insulated and protected. ZORBAX Eclipse PAH columns deliver high resolution separation of the 16 polycyclic aromatic hydrocarbons (PAHs) in EPA 610 and have been specifically tested with PAHs for maximum reproducibility

There are also Metal Foil resistors which provide high rated power and excellent load life stability along with extremely low Temperature Coefficient of Resistance (TCR). ZORBAX Rx columns are made from highly pure (>99.995 %) porous silica with a higher carbon load (12%) ZORBAX Eclipse Plus columns are the recommended starting point for method development at mid-pH and benefit from the ultimate performance from fully porous silica-based columns